After reading my last post for the basic thickness calculator, I have received some mails were asking me for the formula to find the thickness. (In that post, the formula was hided from the users)

Here I am explaining how to find the estimated thickness of a lens before it makes. To find the thickness you need to know the power, index, diameter and the edge/ center thickness.

For plus power you have to consider the edge thickness and for the minus powers you have to consider center thickness. (usual range is 0.9mm to 2.00mm according to the index)

__Formula:__

Thickness= [(1/2*Diameter)^2*Power / [2000*(Index - 1)]] + edge/center thickness

For instance, given a lens power of -3.75 D, a refractive index of 1.53, and a minimum blank size of 65 mm, with 1.50mm center thickness, then the thickness would be:

[(1/2*65)^2*3.75 / [2000*(1.53 - 1)]] + 1.50 = 5.24 mm

For the ease of use I have created an excel file, there you can enter all the input values for the result (fig. 1).

You can download this calculator from here :

**Download Link**
HI, i still got one question: Your formula calculate thickness for a spheric lenses. How do i calculate thickness for the aspheric lenses?

ReplyDeletePower +0,25

ReplyDeleteDiameter 65

Index 1,5

Edge thickness 0,5mm

The calculated center thickness is 0,76mm.

You will not get this lens from any supplier.

I would like to have ASPH formulas as well.

@Anonymous

ReplyDeleteThe formula is correct and verified by us. But unfortunately the edge thickness you have mentioned is too low. For this type of small powers, stock lenses are coming with 1+ edge thickness.

Been trying to download the lens thickness finder, but without succes. Does anybody have a copy.

ReplyDeleteregards

Jens

Pls repost the download link of both the lens thickness calculator in excel & basic thickness calculator

ReplyDeleteregds

how do i work out the power of a lens when i only have the diameter and thickness?

ReplyDeletethat will be quite difficult. It is possible only with non aspherical lenses and need edge, center thicknesses along with its diameter.

DeletePlease repost the download link of both the lens thickness calculator in excel & basic thickness calculator!

ReplyDeleteWhy I have problems with the bevel lens in the mei edge and with the lens dimension.

ReplyDeleteWhich MEI machine are you using?

DeleteThickness= [(1/2*Diameter)^2*Power / [2000*(Index - 1)]] + edge/center thickness

ReplyDeletei do not known where is 2000

Pls let me known. tks so much

ReplyDeletehow to caculation with ED IN PROGRESSIVE LENS. i ccan not understain because it with ADD

ReplyDeletethis is wrong farmoula

ReplyDeleteThis Formula Is Ok, But it will dificult For Plus Poweer Because The thickness Of it At The centre of the lens... We Have to Look for (r) Where it is..

ReplyDelete