Tuesday, May 22, 2012

All about MR Series...(MR-8, MR-7, MR-10, MR-174)

"Mitsui Chemicals is a Japanese Chemicals company. The company mainly deals in performance materials, petro and basic chemicals and functional polymeric materials."

What is MR Lenses: (MR-8, MR-7, MR-10, MR-174)
    Excellent optical materials with high refractive index, high Abbe number, low specific gravity and high impact resistance are provided by polymerizing monomers of MR™ Series. MR™ Series is especially suitable for ophthalmic lenses and is known as the first thiourethane based high index lens material. MR™ Series offers a variety of products to provide the best solution for optical lens users.
R.I. 1.60: MR-8™
The best balanced high index lens material with the largest share of the R.I. 1.60 lens material market.
MR-8™ is suited to any strength ophthalmic lens and is a new standard in ophthalmic lens material.

 R.I. 1.67: MR-7™ & MR-10™
Global standard R.I.1.67 lens material.
Great materials for thinner lenses with strong impact resistance.
Material Characteristics
MR-7™   : Better color tintability
MR-10™ : Higher heat distortion temperature

 R.I. 1.74: MR-174™
Ultra high index lens material for ultra thin lenses.
Strong prescription lens wearers are now free from thick and heavy lenses.


MR™ Series is a brand name of the raw material for optical lenses.
MR™ Series based lenses are available from most leading lens manufacturers.
Comparison of physical properties of lenses made with MR™ Series vs. other optical materials
MR™ SeriesOther
MR-8™MR-7™MR-10™MR-174™Poly
carbonate
Aclyric
(RI:1.60)
Middle
Index
ADC
(CR-39®
RAV7®)
Crown
Glass
Refractive
Index
(ne)
1.601.671.671.741.591.601.551.501.52
Abbe
Number
(νe)
4131313228-303234-365859
Heat
Distortion
Temp. (ºC)
1188510078142-14888-89-84>450
TintabilityGoodExcellentGoodOKNoneGoodGoodGoodNone
Impact
Resistance
GoodGoodGoodOKGoodOKOKOKPoor
Static Load
Resistance
GoodGoodGoodOKGoodPoorPoorGoodGood


MR Series Features:
  • High refractive index for thinner and lighter lenses.
MR™ Series offers 3 different refractive index products (R.I. 1.60, 1.67, 1.74).
With higher index materials, it is possible to achieve thinner lenses with the same strength.
  • Superb optical quality for wearer comfort
  • Both high refractive index and high Abbe number provide optical performance similar to glass lenses.
  • Glass mold-casted MR™ Series shows minimal stress-strain.


High Abbe number material like MR-8™ minimizes prism effect (Chromatic aberration) of lenses and provides comfortable view to all wearers.

High Abbe Number Material
image Abbe Number
Low Abbe Number Material
image Abbe Number
MR™ Series resin is uniformly polymerized in a glass mold. Compared to the injection molded Polycarbonate lens, MR™ Series lens shows minimal stress strain and offers stress free clear vision.
Stress Strain Observation
(Crossed Nichol method using the polarizing film and white light source)
image Strain Free

  • Mechanical strength to protect wearers from accidental injury. 

  • High impact and static load resistance helps promote wearer eye safety.
    (Pass US-FDA drop ball test standards)
  • Good tensile strength for fashionable rimless frames.
  • Good processability for precisely designed progressive lenses (Advantage of thiourethane materials) .
lens
Mechanical Strength
Impact Resistance
  • High impact resistance of MR-8™ helps protect wearers form accidental injury.
FDA Drop Ball Test
MR-8™ shows good impact resistance
US-FDA (Food and Drug Administration) Sec. 801.410
“Use of impact-resistant lenses in eyeglasses and sunglasses”

Static Loading Resistance
Static Loading Test
Quasi-static loading type test for minimum robustness
MR-8™ shows good static load resistance
 Tensile Strength Resistance

  • MR-8™ lens shows good tensile strength.
  • MR-8™ is widely recognized as the best material for rimless frames.
Tensile Test
Tensile test results
MR-8™ lens broke at 72kg tensile force
(All other material lenses broke at smaller forces)
Lens deformation
MR-8™ lens showed no deformation of drilled hole
(60kgf Tensile Force)
 Butterfly Test

  • MR-8™ is adequate for the long time usage of rimless glasses.
“ Butterfly Test ”for Rimless Frames
Endurance test under cyclic
load for spectacle frames
JIS B7283
Specification;
Broke at 20,000 strokes

  • Durability during long time usage under severe conditions
  • Good weatherability provides minimal change in lens color after years of usage.
  • Good compatibility with coating materials.
Lens Color Change
Weatherbility Test
Accelerated test to observe lens color change after long-term usage.
QUV Test: 0.50W/m2, 50ºC, 100hrs
MR-8™ shows only minor color change after exposure to strong UV light.
Wearers can enjoy clearer lenses after long-term usage.
 Coating Compatibility
Heat Resistance Test
Evaluation of cracks in coating after high temperature conditions.
Test condition: 90ºC, 15 min.
Test condition: 80ºC, 15 min.
Good heat resistance and coating compatibility of MR-8™ prevent coating cracks under servere conditions.
 Coating Compatibility
Cross-cut Adhesion Test
1) Cut a coating layer in a reticular pattern.
2) Apply tape over the pattern and then remove it.
MR-8™ showed very good compatibility with coating materials.
Lens wearers can enjoy unchanged high performance lens coating after long-term usage.

How the MR lenses are produced?
Process


1. Preparation of MR™ Series
illust_Preparation of MR™ Series
Mix MR™ monomer (component) A & B with additives, then degas the MR™ monomer mixture.

2. Filling
Photo_Filling
Fill molds with the MR™ monomer mixture.

3. Polymerization
Photo_Polymerization
Place the filled molds into ovens, where they undergo a heat-cycle, turning the MR™ monomer mixture into a MR™ lens.

4. Grinding / Polishing
Photo_Grinding
Grind and polish the surface of the MR™ lens to create a curvature for required strength.

5. Tinting
Photo_Tinting
Tint the surface of the MR™ lens.

6. Coating
Photo_Coating_1
Hard Coating

Photo_Coating_2
Anti Reflection Coating
Coat the surface of the MR™ lens to protect from scratches, reflection etc.

7. Final Inspection
Photo_Final Inspection
Inspect the coated lens.
"MR-8 is the best in hi-index lenses"

credit: wikipedia, mitsuichem.com

12 comments:

  1. great! This is really helpful blog..
    thank you for sharing....

    ReplyDelete
  2. Happy to know that it's OK to tint MR174. I really wonder who has ever succeeded in tinting it without the use of a tintable coating that would inevitably display huge Newton rings! Even for MR8, it's not such an easy job...

    ReplyDelete
    Replies
    1. Asahi-lite introduced anew type of lens called 1.74 hybrid. which can be tinted up to 80%. We are using it successively since 3 months. It is a thin layer of 1.6 material layer attached on the base side of 1.74 lens. Now it is available only in spherical.

      Delete
  3. whaat is the price of mr-8 1.6????

    ReplyDelete
  4. SHARE THE ALL INDEX LENS IN ONE POWER

    ReplyDelete
  5. This blog is truly useful to convey refreshed instructive issues over web which is truly appraisable. I discovered one effective case of this truth through this blog. I will utilize such data now.
    เลนส์โปรเกรสซีฟ

    ReplyDelete
  6. Hi Dear,

    I really prefer your blog..! This blog are very useful for me and other. So I see it every day.

    HI-POINT 995TS BLK 9MM Carbine +P rated. "High Impact Polymer Frame" . High-impact grips. Durable, attractive easy-grip finish.

    Visit Now - https://www.concealedarmsandhomedefense.com/product/hi-point-995ts-blk-9mm-carbine-p-rated-high-impact-polymer-frame/

    ReplyDelete
  7. Great writing! Thank you for sharing.
    Download Indian Doctors Network where you can network and communicate with executive committee members, senior doctors and mentors.

    ReplyDelete
  8. Cured from (HSV)-2, via__________________________ [R.buckler11@ gm a i l. com],…

    HE CURES ALL...

    HERPES 1&2

    HEPATITIS

    FIBROID

    PROSTATE CANCER

    ERECTILE DYSFUNCTION

    ReplyDelete
  9. Insightful perspectives! The Executive Lens offers useful business strategies.
    The Executive Lens

    ReplyDelete

Please write your comments here...